Specifications

Specifications OptiCentric^® Bonding and Cementing Station

• OptiCentric® Base Station including
  • motorized autofocus stage
  • high resolution CCD autocollimator
  • motorized air bearing rotation table
• Dispenser Unit including
  • 2-axis precision stages for glue dispenser
    
  • glue dispenser with angular adjustment
    
  • automated pneumatic dispenser controller
    
  • foot switch for manual control
    
• UV light source including
  
  • high power 300 W UV lamp
    
  • liquid UV light guide with multiple outlets
    
  • foot switch for manual control
    
• Multifunctional PC IO card for instrument control
  
• Automated positioning unit for alignment of lenses in mounts including
  
  • 2-axis precision stages for piezoelectric positioning device
    
  • 1or 3-axis (depending on application) piezo positioning device(s). For ementing: 2-axis piezo stage mounted on air bearing, incl. lens grabber
    
  • Piezo controller
• Mechanical gauge for measuring the run-out of
  reference surfaces on sample or barrel
  
• Integrated user friendly software for the PC controlled automatic glue bonding process, including
  
  • Software Kit Assembly for controlling the dispenser unit, its positioning and the UV light source
    
  • Software Kit Align for controlling the piezo
    electric stage and sample alignment process
    
  • Integrated control software for centering
    error measurement, pass/fail evaluation,
    teach-in programming of assembly procedures, including password protected security levels and manual positioning of all stages
    MultiLens® module for cementing
    
• Factory installed PC with software and IO cards
  installed and tested

Measurement tool fpr miniature lenses

UV curing of a centered lens with four light guides. Left:
Dispenser, Right: Piezo manipulator, Top: autocollimator
with microscope objective