New measurement head for the centering measurement of IR lens systems

At the 2017 Photonics West, TRIOPTICS GmbH introduced a centering test system for IR lens systems with significantly improved measurement quality.

The centering measurement of lenses or lens systems for infrared often requires special consideration during inspection. A VIS measurement system is usually sufficient for measuring individual infrared lenses or installing infrared systems. For measuring installed IR systems, however, a test system matched to IR is indispensable. To meet these requirements, TRIOPTICS, a leading manufacturer of optical test systems, presented its new
OptiCentric® IR centering test system for the first time during the 2017 Photonics West from January 31 to February 2 in San Francisco, US.

The new OptiCentric® IR is characterized by its dual band measurement head that allows measurements in the VIS and MWIR range and in which the latest MWIR camera technology has been integrated. This results in an improved measurement quality as well as, due to the camera’s high sensitivity, a high-contrast measurement point even if reflexes are very weak, such as in anti-reflective lenses. Overall, measurement times are reduced, handling is easier and accuracy increases, now reaching values of ≤ 0.1 µm for VIS and ≤ 1.0 µm for MWIR. “This new development has helped us simplify the measurement process considerably,” Product Manager Dr. Patrik Langehanenberg explains. “The centering measurement with IR light immediately follows the VIS measurement. You no longer need to switch or even reset anything between measurement steps. Switching is done automatically.“

As with all OptiCentric® systems, the OptiSurf® can also be integrated into this new system in order to expand the measurement functions to cover air gaps and center thicknesses of the lenses.




Hafenstraße 35-39
22880 Wedel

Phone: +49 4103 18006-0
Fax: +49 4103 18006-20